Descrizione
Description：
Auto-sensing, no need to operate: Press any button on the remote
control to turn on the auto-sensingmode, the remote ontrol
transmits signals every 3 seconds. As long as the remote control can
start the car as usual,No other action required. If not used for a
long time, press and hold any key on the remote control for 3 seconds,
turn off the remote control to save battery life after LED flashing
twice. General automatic mode needs to be changed battery about a year
. take a remote control when driving, not recommended with car key,
you can put into pocket or luggage bag.
Specification：
unit Working voltage: DC 12 +3V
Static current: ：engine on:5mA,engin off:0mA
Remote Working voltage：3V；
Average static current:5uA
RFID distance：5M ，
Working frequency:433.92MHz
Hopping coded
NOTICE:
When not using the system ,turn the remote off for extends battery
life ,This product is not waterproof design.Antenna should not be
touched by metal.
About installation:
The product need installed by the Profesionales with Car electrician
certificated
For 12V DC car
Package Include:
Package list:(1 set)
1 x Unit with wire
2 x Sensor Remomte
1 x User manual in English
Come funziona: questo prodotto è realizzato con un codice rolling altamente crittografato,
la distanza tra l’unità e il telecomando è di circa 5 metri.
Questo prodotto è adatto per veicoli a 12V.
L’avviso vocale: se l’unità riceve un segnale remoto, cicalino
sound “B” proved to be able to start the engine normally.The remote control battery detection: When the battery voltage is.lower than 2.3V, you start the engine, the buzzerwill BBBB sound.for 10 seconds.Emergency switch function: If the remote control is lost or.damaged, put the emergency switch close to the right (near the side of.the wire outlet), you can start the car normally.
