Descrizione
INTRODUCTION
Sometimes your Pi projects require a display to output system information, e.g. system status, temperature, IP address, etc. Having a full sized display attached is inconvenient if you want your project to be portable.
Use this small OLED to output your required information and keep your product in a nice portable configuration.
Raspberry Pi 0.96 inch OLED display module is designed by 52pi which is made by 128*64 yellow and blue OLED pixels , diagonal is only 0.96 inch .
The controller is SSD1306, communicates via 4-wire SPI, the display have its own backlight, no backlight LED is required .
This reduces the power required to run the OLED and is why the display has such high contrast , extremely wide viewing angle and extremely operating temperature
Method Of Use??
Directly mounted on raspberry pi(A??B??B+)and Pi 2
SPECIFICATION
– Outline Drawing: 370 mm * 300 mm
– Number of pixels: 128 * 64
– Panel size:26.70 mm * 19.26 mm *1.45 mm
– Active area: 21.74 mm * 10.864 mm
– Pixel pitch 0.17 mm * 0.17 mm
– Pixel size: 0.154 mm * 0.154 mm
Features
– Ultra low power supply
– Maximum current 100uA
– Keep up current 12.25uA
– Hardware keep up display
– 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
– Internal DC/DC voltage converter
– SPI driver support , AT 64MHz[TYP] 125MHZ[OB]
– FP frequency: 64fps[TYP] 368fps[OB]
SHIPPING LIST
0.96 Inch OLED Display Module For Raspberry Pi * 1
Dimension: 370 MM * 300 MM / 14.6 inches * 11.8 inches.
Ultra low power supply. Internal DC/DC voltage converter.
SPI driver support , AT 64MHz[TYP] 125MHZ[OB].
FP frequency: 64fps[TYP] 368fps[OB].
Information:http://wiki.52pi.com/index.php/0.96_Inch_OLED_Module_SKU:EP-0049
